Looking after your shears
Everyday habits that keep shears working well, including cleaning, drying, storage and handling, plus how to know when to ask a sharpener for help.
Key takeaways
- Follow the brand's own care instructions first. They know your exact model.
- Wipe and dry your shears after use, and keep them in a case.
- Use them only on hair, and never drop them.
- Ask the brand how to adjust the tension screw and who should sharpen your model.
Shears are precision tools, and small habits affect how they cut and how long they last. The advice here is general. Always follow the brand’s own care instructions, because the brand knows the steel, finish and edge of your exact model.
Start with the brand’s instructions
- Find the care sheet in the box or on the brand’s website, and keep a copy.
- If it differs from this guide, follow the brand.
- Ask what could affect the warranty. Some brands limit who may sharpen or adjust their shears. See the warranty and service questions.
Clean and dry after use
- Wipe the blades and handles with a soft cloth. Remove hair and product, especially around the pivot.
- Dry them fully before you put them away.
- Ask the brand which cleaning or disinfecting products suit your model. Some products can mark some finishes.
A light touch of oil, if the brand says so
Some brands recommend a drop of oil at the pivot, and some do not. If yours does, use the oil it names and apply it as it describes. Wipe away any excess. If the brand does not mention oil, ask before you add any.
Store them in a case
- Close the shears and put them in a case or pouch when you are not using them.
- Avoid leaving them loose in a drawer or an apron pocket.
- Keep them somewhere dry.
Handle with care
- Never drop them. A drop can knock the blades out of line or damage the edge, even when nothing shows.
- Cut only hair. Paper, tape, wire and packaging can nick or wear an edge.
- Do not use them as a tool. Opening a box or prying can bend or chip a blade.
The tension screw
The tension screw sits at the pivot. It holds the blades together and sets how firmly they press against each other. Too loose or too tight can cause problems.
Methods differ by model, and some brands prefer to adjust the screw themselves. Ask the brand how to adjust yours before you turn it, and whether doing it yourself affects the warranty. This guide gives no settings, because the right one depends on the model.
When to get professional sharpening
How often a pair needs sharpening depends on the edge, the steel and how you use it. Ask the brand what it advises for your work. Sharpening needs the right equipment and skill, especially on a convex edge, and the wrong method can damage an edge. This guide does not give sharpening steps.
When you choose a sharpener, ask:
- Do you work on my edge type: convex, bevel or micro-serrated?
- Does the brand approve of you, and will your work affect my warranty?
- What does it cost, how long does it take, and who pays shipping both ways?
- Do you check the tension and the pivot as part of the service?
- Can you tell me in writing what you did?
Signs that something is wrong
- Pulling. The shears tug or snag hair instead of cutting it cleanly.
- Chewing. Hair folds or gets pushed along between the blades.
- Rough closing. You feel grinding, grit or a catch partway through the stroke.
- Play. The blades wobble at the pivot, or a blade looks bent or chipped.
The cause can be build-up near the pivot or a damaged edge. Clean and dry the shears first. If the problem stays, stop using them and contact the brand or a sharpener it approves.
If a new pair does this out of the box, keep your receipt and packaging and contact the seller and the brand. See how to spot fake professional shears for other signs. Before you buy, read choosing professional shears that fit you.
Check a seller now. Paste a website into the register to see whether it has been verified.