The shear glossary.
Plain definitions of the words used to describe professional shears, and of the claims sellers make about them.
Blades and edges
- Convex edge
- A blade edge ground in a smooth, rounded curve, like an axe, instead of a flat angle. Often found on premium hairdressing shears for a very sharp, smooth cut. Sharpening a convex edge usually calls for a specialist, so ask the brand how it should be serviced.
- Bevel edge
- A blade edge ground at a flat angle. Common on many shears. Generally simpler to sharpen than a convex edge.
- Micro-serrated edge
- Tiny teeth on one blade that grip the hair as it is cut, which helps stop it from sliding away. Used by some stylists for particular techniques.
- Blade length
- The length of the cutting edge, which is shorter than the overall size of the shear. A “6.0 inch” shear is normally 6 inches overall, and brands measure size differently, so check which measure a listing uses.
- Slide cutting
- A technique where partly open blades slide along the hair, cutting as they travel, to remove weight or blend. Stylists often prefer a particular edge type for it.
Handles and fit
- Offset handle
- A handle where the thumb ring sits lower than the finger ring. It lets the hand rest in a more natural position. Many stylists find it more comfortable, and fit varies.
- Crane handle
- A handle with an angled, bent shank so the thumb and hand sit in a lower, more relaxed position. Often a more pronounced offset. Brands name these designs inconsistently.
- Opposing handle
- A symmetrical handle where the finger and thumb rings are level. Sometimes called even or classic.
- Tang
- A small extension on the finger-ring handle, also called a finger rest, where the little finger can sit for control.
- Left-handed shears
- Shears made for the left hand. The blades are mirrored so the cutting edge works properly in the left hand. They are not just a right-handed shear turned over.
Types of shears
- Cutting shears
- The standard shear for cutting hair, with two smooth (non-toothed) blades. Sometimes called scissors, shears or hair scissors.
- Thinning shears
- Shears with teeth on one or both blades that remove bulk or blend lengths. The number of teeth and the gaps between them set how much hair is removed.
- Blending shears
- A name brands give to toothed shears, usually between thinning and texturizing in tooth spacing. Thinning, blending and texturizing names overlap, so check tooth count and spacing, not the name.
- Razor
- A blade used for cutting and texturizing hair. It is a different tool from a shear, though the two are often sold by the same sellers.
Construction and materials
- Tension screw
- The screw at the pivot that holds the blades together and sets how firmly they press against each other. This affects how smoothly and cleanly they cut. Too loose or too tight causes problems, so ask the brand how to adjust it.
- Pivot
- The point where the two blades join and turn. Wobble or grinding at the pivot is worth asking the brand about.
- Stainless steel
- Steel with enough chromium to resist rust. Most shears are made from a stainless steel. Grades differ in hardness, toughness, corrosion resistance and ease of sharpening.
- Steel grade
- The name of a specific steel, such as 440C or VG-10. Names are common in marketing. The grade alone does not say how a shear is made or heat-treated, so ask the brand for the grade of the exact model. A grade name does not show where the steel or the shear was made.
- Hardness (HRC)
- Rockwell hardness, a scale used for steel. Harder steel usually holds an edge longer but can be more brittle. A number on a listing is only meaningful if the brand states it for that model.
- Coating
- A finish on the surface of the blades or handles, such as titanium or a black coating. It does not change the steel underneath.
Care and service
- Sharpening
- Restoring the edge. Methods differ by edge type, and some brands advise using only their own service. Using a different sharpener can affect the warranty. Warranty and service questions.
- Warranty
- A brand or seller promise to repair or replace a product under set terms. Typically covers manufacturing defects, not wear or damage. Ask who honors it. Warranty and service questions.
Buying and authenticity
- Genuine
- Made by, or with the permission of, the brand it says it is from, and as described. The opposite of a counterfeit. A genuine product can still be used, gray market or sold by an unauthorized seller. What the words mean.
- Authorized seller
- A seller the brand has agreed may sell its products. The brand, not the seller, decides this. What the words mean.
- Verified
- Checked by an independent organization. What was checked matters. At Shear Alliance, verified means a seller’s identity, websites and policies were checked against the published standards. The standards.
- Counterfeit
- A copy made to pass as a particular brand’s product, usually using its name, marks or packaging. How to spot fake shears.
- Lookalike
- A product styled to resemble another design without using the brand’s name or marks. Whether that is allowed depends on the country and the details. Check that the listing does not imply a link to the brand.
- Gray market
- Genuine products sold outside a brand’s authorized channels, such as stock made for another country (parallel imports). Selling them is not necessarily unlawful, but the brand’s warranty and service may not cover them.
- OEM and private label
- Products made by one factory and sold under another company’s name. Common and legitimate. The brand name does not show who made it or where, so ask if it matters. Origin claims.
- Model code
- The name or number that identifies a specific product. Use it to compare a listing with the brand’s own page. Model codes and serial numbers.
- Serial number
- A number that identifies one item. A batch or lot code identifies a production run. Not every brand uses either, and both can be copied, so treat one as a clue, not proof. Model codes and serial numbers.
The glossary explains words. It does not test, rate or rank any product. Missing a term? Tell us.
Founding cohort open
Join the register as a founding member.
Founding members join free for 12 months from the day they are listed. Apply in a few minutes. We verify against published standards and issue your badge when you pass.